Clear Super Gloss 1040-1220

Product Code: (EQB5381.500 / EQB5381.1 / EQB5381.5 / EQB5381.10)

*(inc GST)

500 mL	$16.17
1 L	$26.95
5 L	$121.28
10 L	$194.04

Cesco Brushing Gloss Glaze. Firing Range 1040-1220ºC. Earthenware to Midfire
Food Safe No Lead frit is used in the manufacture of this product. This glaze is Zinc free.
Keep lid tightly closed during storage and if thickening occurs add a small amount of water.
APPLICATION OF BRUSHING GLAZE Prior to glazing
Bisque fire the ware to its recommended temperature (minimum 1000°C). Sponge bisque with a damp sponge to remove any dust which may have collected. On narrow necked pieces where a sponge cannot work, use a clean damp brush. Do not eat, drink or smoke whilst handing your work as any grease transferred to the bisque will resist glaze. Although it may appear to cover grease spots when applied, glaze may crawl away when fired.
Application of Brushing Glaze
Once the container of liquid glaze has been shaken and stirred, load your glaze brush by immersing the hair up to the ferrule. Remove the glaze from one side of the brush and apply the fully loaded side to the bisque. As an approximate guide, a fully loaded brush will go about 80 mm before it should be re-loaded. Apply one even coat, let the "wet" look disappear, then apply a second coat in the opposite direction. When the second coat has lost its "wet" look, apply a third coat in the same direction as the first.
Australian Made with local support available