Clays - Glazes - Colours - All Supplies


SHOPPING CARTSHOPPING CART
(0) $0.00
Clear Gloss Glaze 1000-1120 Food Safe  Dipping 10L

Click Image to Enlarge

Clear Gloss Glaze 1000-1120 Food Safe Dipping 10L

Product Code: ELB6400.10

$283.62 (inc GST)

10 Litre Bucket
Food & Drink Safe - designed for high expansion Hobby Bodies & Terra Cotta's
Cesco Dipping Gloss Glaze. Firing Range 1000-1120ºC. Earthenware
Contains RED or BLUE organic dye for ease of application on white bodies
Food Safe Lead release is within Australian Standard limits
Keep lid tightly closed during storage and if thickening occurs add a small amount of water.
Australian Made with local support available Ballmilled wet glaze ready for dipping or spraying
Setting up a glaze from powder for Dipping or Spraying
MIXING
For dipping or spraying
When some liquid glazes settle out, particularly over a long period of time, they sometimes set hard at the bottom of the container, making them difficult to re-mix. Others may settle during use and consequently demand thorough stirring or agitation during the dipping / spraying session. To correct this defect, a flocculent or anti-set solution should be added a little at a time, (see Epsom Salts solution recipe below) stirring it in very well until the settling stops. Add carefully or the glaze will dry slowly on the ware and may cause mud cracking, peeling off the biscuit and perhaps crawling during firing. Glazes that have a high clay content, raw zinc oxide, magnesium carbonate, talc, etc., or have had excess dosing of anti-set will have this defect. The cure is to add very cautiously, small quantities of a 10% solution of deflocculant - Soda Ash, Dispex or Sodium Silicate, stirring well, until normal drying and behaviour occurs.
APPLICATION
Use either a bucket or glaze wok or suitable spray gun. The type of glaze and the effect desired will indicate how the ware should be applied: transparent glazes should be thinner than opaque ones so dip once only. A rutile glaze may be dipped once or twice for varying colour effects. Walker Ceramics dipping glazes are delivered with a litre weight of 1500-1750 grams/litre (Specific Gravity (SG) of 1.5-1.75) depending on glaze composition. After application the glaze layer should be as thick as the diameter of a standard steel paper clip.
Litre Weight bottles are available to check your litre weights - Code HC80.
They are used to calculate accurate litre weights when mixing casting slips and dipping glazes. It is supplied with a simple conversion chart and also a method to test the accuracy of your scales. Litre weights can be checked on the supplied chart between 1380 and 1775 gm/L. (To make Epsom Salts solution, mix 300 gm of Epsom Salts with 1 litre of hot water.)
It is highly recommended to use a Ford Cup or Viscosity Cup and aim for run-out time of 15 to 20 seconds.
After application the glaze layer should be as thick as the diameter of a standard steel paper clip.

Volume Discounts

5 X 10L -15%, 10 X 10L -25%

Brand: Cesco

Documents:
Material Safety Data Sheet (PDF)